Alvarion BreezeACCESS 4900 User Manual download pdf (Page 117)

Trap Monitor

BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual

2.12 Trap Monitor

The Trap Monitor tab enables viewing details of traps received from all units that

send traps to the BreezeCONFIG management station.

To enable sending of traps in managed units:

In the Network Management Send Traps tab of each relevant unit, configure the

Traps Sending to Enable and add the IP Address of the BreezeCONFIG station to

the Send Traps To table.

Figure 2-41: Trap Monitor Tab

The Trap Monitor tab is comprised of the following columns:

 Date & Time: Displays the date and time that the SNMP trap is received.

 Source IP Address: Displays the IP address of the unit that sent the SNMP

trap.

 Description: Displays a description of the SNMP trap message. The trap

variables are displayed in the relevant following columns.

 Device MAC Address: Displays the MAC address of the unit from which the

SNMP trap originated.

1 2 ... 112 113 114 115 116 117 118 119

No comments

Alvarion BreezeACCESS 4900 User Manual Page 117