Alvarion BreezeACCESS 4900 User Manual download pdf (Page 78)

Unit Configuration

BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual

 Access to Network Management: From the dropdown list, select the port

through which the unit can be managed, from the following options:

 Wireless Only

 Ethernet Only

 Both

CAUTION

Be careful not to block your access to the unit. For example, if you manage an SU via the wireless

link, setting the Access to Network Management parameter to From Ethernet Only completely

blocks your management access to the unit. In this case, a technician may be required to change

the settings at the user's site.

 SNMP Communities

 Read: Enter the read-only community string, which serves also as the

read-only password for the monitor program.

 Write: Enter the read/write community string, which serves also as the

Administrator password.

 Installer Password: Enter the Installer password.

2.6.1.1 Filtering Parameters

 Enable Filtering on: From the dropdown list, select whether to disable or

enable the IP address-based management filtering option. If enabled, only

stations with an IP address matching one of the entries in the Network

Management IP Address table can manage the unit. When enabling the

option, select the port to which the filtering is to be applied, from the following

options:

 Disable

 Active on Ethernet Port

 Active on Wireless Port

 Active on Both

 Network Management IP Addresses: To define an IP address through which

the unit can be managed, select a row in the IP Address column and enter the

required IP address. The table includes up to 10 entries.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 118 119

No comments

Alvarion BreezeACCESS 4900 User Manual Page 78