Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 87 System Manual
FTP User Name: The FTP User Name option enables defining the user name to
be used for accessing the FTP server that is hosting the file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
FTP Password: The FTP Password option enables defining the password to be
used for accessing the FTP server that is hosting the file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
Show Configuration File Upload/Download Parameters: Displays the
current values of the Configuration File Upload/Download parameters.
4.2.3.13 LED Mode
The LED Mode submenu controls the SNR bar and LED indicators’ behavior. By
default, the LEDs indicate the SNR level, which facilitates SU antenna’s
alignment. However, it is also possible to customize the SNR bar to indicate when
specific thresholds for RSSI, SNR, CRC percentage and average modulation are
reached.
4.2.3.13.1 Change Mode
This submenu allows switching between the operation modes that are available
for the LEDs. The following options are available:
Normal mode: This is the default operation mode. The green LEDs on the bar
indicate the SNR level while the LED indicators show the unit’s status,
ethernet and wireless activity. See “Outdoor Unit Verification” on page 58 for
detailed information.
Threshold mode (SU only): This mode allows users to define a custom
behavior for each of the 8 SNR LEDs, based on the RSSI, SNR, CRC ratio or
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway IP Address,
FTP User Name and FTP Password). This set (or relevant parts of the set) serves the SW
Download procedure, the Configuration File Upload/Download procedure and the Event Log File
Upload procedure. Changing any of these parameters in the menu for either procedure will
automatically change its value in the menu for the other procedures.
Comments to this Manuals