Alvarion BreezeACCESS 4900 Specifications Page 256

  • Download
  • Add to my manuals
  • Print
  • Page
    / 257
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 255
Appendix F - Troubleshooting Low Throughput Problems
BreezeACCESS 4900 230 System Manual
F.3 Low Throughput Problems
* The throughput results are for net TCP traffic (excluding protocols overheads)
Table F-3: Low Throughput Problems
Problem and Indication Possible Cause Corrective Action
Low throughput is suspected
(Check the dominant
Modulation Level in Per rate
Counters and see expected
throughput in the "Expected
Throughput" table below)
Ethernet link problems
Verify proper settings of Ethernet operation mode
(actual Ethernet speed of 100 Mbps).
Check Ethernet counters
Wrong configuration of
Maximum Modulation
level
Verify that Maximum Modulation level is not set to a
value that is not too low according to the
"Recommended Maximum Modulation Level" table
below.
Low throughput of
multicast/broadcast traffic
Non-optimal
configuration of
Multicast Modulation
level
A value that is too low (see the "Recommended
Maximum Modulation Level" table below) may
degrade throughput of broadcast and multicast
traffic.
High retransmissions rate Interference problems
(retransmissions rate
in excess of 15%)
Check for interference using the Spectrum Analysis
Mode. If necessary, change the operating frequency
of the AU.
Table F-4: Expected Throughput in Mbps, TCP session @ 10 MHz Bandwidth Burst Mode Enabled,
Concatenation Enabled
Modulation Level Uplink Downlink Aggregate
(Bi-directional)
1 2.5 2.3 2.4
2 3.5 3.2 3.5
3 4.8 4.7 4.8
4 6.9 6.6 6.9
5 8.8 8.9 9.1
6 12.1 12.7 12.8
7 15.3 17.1 16.3
8 16.6 18.6 17.8
Page view 255
1 2 ... 251 252 253 254 255 256 257

Comments to this Manuals

No comments