Alvarion BreezeACCESS 4900 Specifications Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 257
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS 4900 98 System Manual
4.2.5.2 Ping Test
The Ping Test submenu is used to control pinging from the unit and includes the
following options:
Destination IP Address: The destination IP address of the device being
pinged. The default IP address is 192.0.0.1.
Number of Pings to Send: The number of ping attempts per session. The
available range is from 0 to 9999. The default value is 1. Select 0 for
continuous pinging.
Ping Frame Length: The ping packet size. The available range is from 60 to
1472 bytes. The default value is 64 bytes.
Ping Frame Timeout: The ping frame timeout, which is the amount of time (in
ms) between ping attempts. The available range is from 100 to 60,000 ms. The
default value is 200 ms.
Start Sending: Starts the transmission of ping frames.
Stop Sending: Stops the transmission of ping frames. The test is
automatically ended when the number of pings has reached the value
specified in the No. of Pings parameter, described above. The Stop Sending
option can be used to end the test before completing the specified number of
pings, or if continuous pinging is selected.
Show Ping Test Values: Displays the current values of the ping test
parameters, the transmission status, which means whether it is currently
sending or not sending pings, the number of pings sent, and the number of
pings received, which means the number of acknowledged frames.
4.2.5.3 Link Quality (SU only)
The Link Quality submenu enables viewing continuously updated information on
the quality of the wireless link. The Link quality submenu includes the following
options:
4.2.5.3.1 Continuous Average SNR/RSSI Display
The Continuous Average SNR/RSSI Display option displays continuously
updated information regarding the average quality of the received signal, using
Signal to Noise Ratio (SNR) and Received Signal Strength Indication (RSSI)
measurements.
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 256 257

Comments to this Manuals

No comments